Parsons Range of mechanical handling chain and components has been specially developed to withstand the arduous and demanding conditions associated with heavy-duty bulk materials handling. The range is in alloy steel, heat-treated to produce the optimum combination of high strength and wear resistance. This equipment can be relied upon to operate for long periods on bulk handling installations with minimum maintenance, even in the most abrasive, corrosive or wet conditions. It has major advantages in terms of cost and long service over fabricated-type chain and is especially designed for maximum resistance to interlink wear even when handling the most difficult materials.





Din 22252:2001 – Round Link Steel Chains
Calibrated and tested for conveyors and haulage systems

Nominal Size d x t	Diameter		Pitch		Width		Gauge Length
mm	d	Tolerance	t	Tolerance	inside B1 min	Outside B2 max	5 x t	Outside B4 max
14 x 50	14	± 0.4	50	± 0.5	17	48	250	± 1
18 x 64	18	± 0.5	64	± 0.6	21	60	320	± 1
19 x 64.5	19	± 0.6	64.5	± 0.6	22	63	322.5	± 1
22 x 86	22	± 0.7	86	± 0.9	26	73	430	± 1
26 x 92	26	± 0.8	92	± 0.9	30	85	460	± 1
30 x 108	30	± 0.9	108	± 1.1	34	97	540	± 1.2

Round Link Material Handling Chain

Nominal Size d x t	Reference Number	Test Force  TF	Breaking Force - BF	Bend Test Deflection – min.	Wt
mm		kN	kN	mm	kg
14 x 50	14050 RDR	185	246	14	4
18 x 64	18064 RDR	305	407	18	6.6
19 x 64.5	19064 RDR	340	454	19	7.6
22 x 86	22086 RDR	456	608	22	9.5
26 x 92	26092 RDR	637	850	26	13.7
30 x 108	30108 RDR	848	1130	30	18

For use with abrasive material or where excessive friction occurs and may increase operational life by up to five times that of standard chain.

Din 22252:2001 – Round Link Steel Chains
Additional proof  loaded and tested

Nominal Size d x t	Diameter		Pitch		Width		Gauge Length
mm	d	Tolerance	t	Tolerance	inside     B1 min	Outside   B2 max	5 x t	Outside  B4 max
14 x 50	14	± 0.4	50	± 0.5	17	48	250	± 1
18 x 64	18	± 0.5	64	± 0.6	21	60	320	± 1
19 x 64.5	19	± 0.6	64.5	± 0.6	22	63	322.5	± 1
22 x 86	22	± 0.7	86	± 0.9	26	73	430	± 1
26 x 92	26	± 0.8	92	± 0.9	30	85	460	± 1
30 x 108	30	± 0.9	108	± 1.1	34	97	540	± 1.2

Round Link Case Hardened Chain

Nominal Size     d x t	Reference Number	Test Force  TF	Breaking Force - BF	Total Case Depth	Effective Case Depth 550 HV min	Wt
mm		kN	kN	mm	mm	kg
14 x 50	14050 RCH	75	125	1.4	0.7	4
18 x 64	18064 RCH	123	205	1.8	0.9	6.6
19 x 64.5	19064 RCH	136	227	1.9	1	7.6
22 x 86	22086 RCH	182	304	2.2	1.1	9.5
26 x 92	26092 RCH	255	425	2.6	1.3	13.7
30 x 108	30108 RCH	339	565	3	1.5	18

Shackle Type Connectors
There is also a range of suitable nuts, bolts and flight bars available. Further details can be obtained on request.




Twin Outboard Shackles

Nominal Chain Size	Ref  No.	Test Force min.	Elongation at Test Force	Breaking Force min.	Elongation at Break
mm		kN	% max	kN	% M
14 x50	C1575	180	2	225	8
18 x 64	C1519	300	2	370	8
19 x 64.5	C2569	325	2	405	8
22 x 86	C2571	440	2	550	8
26 x 92	C2573	580	2	725	8

Twin Outboard Shackles Specifications

Nominal Chain Size mm	Part No.	A	B	C max	D	E	F	F	H	K	S	T	W	Wt. kg/m
14 x 50	C1575	50	15	81	29	48	30	23	17	18	30	13	18	0.5
18 x 64	C1519	64.5	20	105	44	55	40	31	21	19.5	43	19	40	1.38
19x64.5	C2569	64.5	20	105	44	55	40	31	21	19.5	43	19	40	1.38
22 x 86	C2571	86	24	134	58.5	75	46	37	25	24	52	22	44	2.58
29 x 92	C2573	92	28	148	60.5	85	53	43	28	30.5	58	26	46	3.32

Padless Connector Specifications

Nominal  Chain Size mm	Part No.	A	B	C max	D	E	F	Wt. kg/m
14 x 50	C1981	50	47.5	17	28	15	23	0.46
18 x 64	C1980	64	55	22	38	19	30	1
22 x 86	C2903	86	75	31	50	23	38	1.6
30 x 108	C2258	108	96	34	64	31	50	4

Standard Fabricated Sprockets Dimensions

Chain Size mm	Part Number	No. of Teeth	X	Y	Z	PCD	OD	Std Pilot Bored	Est. Wt. kg
14 x 50	1074000	6	100	51	114	194	238	25	12
14 x 50	1074300	8	113	51	120	256	300	25	18
14 x 50	1074400	10	176	51	128	319	364	25	35
14 x 50	1074500	11	210	51	128	352	396	40	43
14 x 50	1074600	13	178	51	120	415	460	40	44
18 x 64	1074700	6	125	59	114	247	308	25	20
18 x 64	1074800	8	146	59	152	328	390	25	36
18 x 64	1074900	10	230	59	152	409	470	40	69
18 x 64	107500	11	270	59	152	450	515	45	90
18 x 64	1075100	13	280	59	202	531	592	45	129
22 x 86	1075300	6	170	96	152	335	420	25	54
22 x 86	1073944	8	278	96	172	442	526	25	118
22 x 86	1075200	10	305	96	178	550	634	45	165
26 x 92	1090900	6	180	101	160	354	434	32	55
26 x 92	1091000	8	262	101	180	471	551	40	99
26 x 92	1155400	10	380	101	180	588	668	40	187
30 x 108	1105400	6	230	117	200	416	517	50	122
30 x 108	1086800	8	326	117	200	554	655	100	215
30 x 108	1086900	11	400	117	200	759	860	100	355

Nominal Chain Size	Recommended	Torque	Securing Screw Reference Number
mm	Nm	1lb-ft
22 x 86	50-75	40-55	C 271901
26 x 92	100-120	74-88	C 271902
30 x 108	100-120	74-88	C 271903

Nominal chain size	Reference Number	Dimension mm						Test Force min.	Elongation at test force	Breaking force min.	Wt.
mm		A	B	C	D	L	T	kN	% max	kN	kg
22 x 86	C 2532	28	85	55	23	132	86	525	1.2	750	1.8
26 x 92	C 2537	30	95	65	27	148	92	735	1.2	1050	2.6
30 x 108	C 2546	35	109	75	30	170	108	990	1.2	1400	4

Chainlock Connectors have been specifically designed for joining together conveyor chains. This performance has been achieved through careful choice of materials and heat treatment whilst keeping the dimensional properties of the mechanical joint within DIN 22258 Part 2 2003. This will ensure that the Chainlock Connectors - which must be installed in the horizontal plane only! - will safely negotiate sprockets designed with this specification and requirements in mind.



PADLOCK CONNECTORS MUST BE INSTALLED IN THE HORIZONTAL PLANE ONLY.
it is essential that the grooves and faces are clean and the location marks are correctly matched before assembly